View A Video on Coating Services- A Quick Introduction
Coating of materials is done to protect, preserve, or aesthetically improve their surfaces. The most familiar coatings are paints used on buildings and cars, and although both objects are painted, the type of paint and methods of application are very different.
Industrial coating applications provide corrosion resistance or a surface that performs a specified function, such as non-stick cookware or non-skid walkways. The process may be as simple as placing the protectant on the outside of an object or may require complex thermo-, chemical-, or timed- reactions to set the coating.
Coating technology has developed alongside industry, perhaps even paving the way for certain technological advances. It covers a wide range of products and utilizes state-of-the-art equipment to offer coating solutions to nearly every corner of commerce. Some industrial coating options include metal plating, dip coating, powder coating, and spray coating.
The surface of the object to be coated is referred to as the substrate.
Protective coatings have been with us since the first person smeared a layer of mud over a wall to improve its integrity, and shared the innovation. This might have been done to create a smoother interior or to help block wind, sun, or rain from entering a shelter.
Paint has been used for millennia to decorate, tell stories, and protect surfaces, but industrial paints were not manufactured until the mid 1800s. The Industrial Revolution brought the advent of assembly lines, which spawned the need for protective coatings of industrial equipment and products.
In 1844, an accidental discovery showed that deposition of nickel-phosphorous ions occurred in a chemical reduction bath, such as sodium hypophosphite. In 1911, Roux patented the "spontaneous and complete" electroless nickel coating process.
The electroless nickel process was further exploited in 1946, when Brenner and Riddell expanded on previous information and developed a method of plating the inner walls of tubes with nickel-tungsten alloy. Their 1950 patent, giving due credit to their predecessors, was allowed on the basis of their process being controlled, only coating specified catalytic surfaces. Their discoveries eventually led to diamond and PTFE deposition, changing the world forever.
World War II was a turning point for industry. The mass construction of airplanes, aircraft carriers, and ground support facilities created a boom in technology. The need for tools, equipment, and structures that were durable, functional, and safe became paramount. Industrial coatings that could withstand the ravages of weather, war, and time were developed on a grand scale.
By 1918, people were learning the health hazards of the materials used in industrial coatings, lead being the primary offender. In 1950, conscientious manufacturers voluntarily removed lead from their processes and products. It was not until 1978 that the Consumer Product Safety Commission banned the use of lead completely.
In the 1980s, high velocity oxy fueled (hvof) spray techniques were developed, pushing thermal plating and surfacing to the forefront of coating technology.
Since 1996, cold spray processes have been in the works, with fair success, to develop coatings of alloys including copper, aluminum, stainless steel, titanium, Inconel, and other metal composites for use in clean rooms and environments where possibility for contamination must be kept at a minimum.
Putting On Your Coat
Substrates should be prepared for processing before entering the coating process. Surface preparation may include grinding, sanding, milling, or washing. Chemical or heat treatments may be necessary. The substrate should be free of grease, dust, and debris prior to coating.
Dielectric coating, or conformal coating, refers to the complete coverage of an object, with regard to its shape. It includes epoxies, urethane, silicone, or acrylics that are sprayed onto the substrate and allowed to harden through the catalytic chemical reaction between ingredients of the coating.
Electroplating, also known as electrodeposition, electrophoretic
deposition, or electropainting, can be used to build up thickness of parts, to form objects, or to provide a corrosion, abrasion, and wear resistant surface. Coins are some of the most familiar items to be manufactured this way. Electroplating is accomplished by placing a pre-cleaned object, which acts as a cathode, into the plating vat filled with electrolytic solution. The solution, which acts as an anode, is composed of dissolved metal salts and ions. The temperature of the cathode (object to be plated) is allowed to equalize with the anode (solution in the vat). A DC electric current is applied to the solution, causing the plating solution to oxidize the metal. The ionized metal accumulates on the surface of the substrate. The longer the object remains in the electrified solution, the thicker the coating will be. Electroplating is also used for chrome plating, although chemicals used in the chroming process are highly toxic and alternative methods of achieving a similar finish have been heavily pursued.
Electroless nickel plating is an auto-catalytic process of metal deposition that does not require the use of electricity. The substrate is thoroughly cleaned before being submerged in a chemical bath that reduces nickel alloy ions suspended in the solution. The nickel adheres to the substrate through covalent bonding caused by the chemical reduction. Polymers may be added to the solution to add flexibility to the finish. Gold may be added to the alloy for use in manufacturing electronic components. EN plating provides an even coat on the substrate. It covers recesses, holes, and back sides of the object. The process is inexpensive and requires no electricity, but the plated product is inferior to an electrolytically plated one, and the cost of waste management from the chemical process may be exorbitant.
Polytetrafluoroethylene, PTFE coating is a thermoplastic polymer that was accidentally discovered in experiments with electroless plating. It is a high molecular weight, hydrophobic fluorocarbon, consisting exclusively of carbon and fluorine, with a very high coefficient of friction. The slick, water repellant surface makes it an excellent choice for catheters, non-stick cookware, and pipes for conducting corrosive liquids.
Thermal spray coating, also known as spray welding, includes oxy-acetylene flame spray, twin wire electric arc spray, high velocity oxy-fuel (hvof) spray, plasma spray, and metalizing. These coatings are typically thicker than plating and can be used on substrates of almost any metal and some plastics. Thermal spray coatings may be made from ceramics, tungsten carbide, stainless steel, nickel/ chromium carbides, or pure metals, including gold, silver, copper, or nickel. Oxy-acetylene flame spraying is the original method of thermal coating. It crosses the heat of the welding torch with a high velocity air stream that blasts a stream of molten wire or powder feed onto the substrate surface. Twin wire electric arc spraying works on the same principle as oxy-acetylene flame spraying except that the heat comes from an electric arc, as opposed to a gas fed flame. The wire feed provides the metal coating product as well as the arcing medium, typically aluminum or zinc. A high velocity air stream blows the molten metal onto the substrate as it melts.
Powder coating is quickly becoming one of the most popular ways to coat surfaces. The process starts with finely ground, electrically charged pigments mixed into powdered resin. The object to be coated is electrically grounded. The charged particles adhere to the grounded surface as they are sprayed to the correct thickness. The object is heated in a curing oven until the resonated powder fuses into a uniformly smooth surface finish of durable high quality. No premixing is required and no adjustments for viscosity must be made, making the automated process fast, and generally, flawless. A broad spectrum of formulas provides the desired color and texture for finished surfaces, including aluminum, steel, glass, ceramics, plastic, and wood products. Powder coating services offer the advantage of cost effectiveness from several standpoints. The pigments contain no VOCs and require no chemical solvents. Up to 99% of the overspray can be reclaimed, reducing waste, waste management, air purification, and environmental concerns. The coating may be applied in thicknesses of one to eight mils, that do not run or sag, in a single pass, keeping production rates high and rejection rates low.
Plasma spray coatings provide high quality coatings for high temperature or heavy duty purposes. Similar to twin arc spray welding, the plasma arcs form between the anode and the cathode, but the arcs are surrounded by a carrier fluid. The carrier fluid may be helium, hydrogen, nitrogen, or oxygen. The gas is superheated to over 26,500 degrees F., creating a plasma flame, which is propelled by a plasma jet that melts the metal as it accelerates, and is then splat deposited on the substrate, where it flattens and adheres. Multiple passes and length of exposure time determines the thickness and texture of the deposition. Plasma coating is an efficient and economic process used in manufacturing mining and farm equipment, pumps, and engine parts. Because the high temperature and velocity involved in the manufacturing process creates an extremely durable, high temperature tolerant finish, plasma spray coatings are ideal for refractory materials or aircraft and aerospace grade components.
PVD coating, physical vapor deposition, is a process of vaporizing material in a vacuum chamber, then blasting the atoms onto the substrate where they condense into a film.
PVC coating, not to be confused with PVD coating, is a dip coating process in which items are dipped into liquid polyvinylchloride (PVC) and allowed to air dry or heat cure. The PVC coating may be permanent or removable. It is often used for industrial process masks, covering surfaces that are to be protected during processing, then peeled off, for alternate treatment in later steps. PVC coatings provide sound dampening and cushioning effects for transfer trays and conveyor guides. They are used to decorate and protect metal shelving and components, and to make or replace hand grips on tools.
Ceramic coatings are inorganic, non-metallic coatings that may be semi-crystalline or amorphous. They are hydrophobic and oleophobic, making them highly resistant to water, solvents, and oil. These "advanced ceramics" may be applied by powder coating, plasma spray, chemical vapor deposition, or spray coating. The ceramic product may contain silicon, tungsten carbide, chrome oxide, titanium dioxide, alumina, zirconium, or magnesium. Products with applications of ceramic coatings include automobiles, appliances, electronics, medical equipment, and marine equipment.
Who's Got You Covered?
Coating services suppliers are as diverse as the products they provide. Choosing the right coating services for your product will depend on the product in question and the type of finish desired.
A satisfactory custom finish includes getting the right color, texture, durability, and resistance factors for your design. If there are required standards that must be met regarding food safety, medical uses, electronic applications, or personnel safety, your coating services provider will know which finish products are appropriate and will direct you accordingly. They should be able to answer any questions you have about the process or the finished product.
The right service company is always concerned with the consistency, quality, and cost effectiveness of their product, offering you a product you can stand by at a price you can afford.
Additional Coating Services Types
including forced-air dried coatings, are those which are not heated
above 194oF (90oC) for coating or drying.
utilize compressed air to spray liquid coating through a small opening
at high pressure. The materials are not mixed with air before being
sprayed through the nozzle.
are heated to a temperature of 194oF (90oC) in order to cure or dry
- is a thin-film coating process that produces a film by
a chemical reaction. CVD processes often use unstable elements to coat
cemented carbide inserts.
- have good corrosion resistance and provide a good base
for paint or rubber bonding. However, chromate conversion coatings have
little to no abrasion resistance.
is a lubrication process that helps to prevent scuffing and galling,
reduces friction, provides extra protection by preventing damage from
oil film failure and aids in the distribution of heat, resulting in
less metal fatigue, which reduces the chance of part failure. Dry film
coating does not cause any dimensional changes to the product to which
it is applied, because it is impregnated directly into the metal surface.
also known as “electrodeposition,” “electrophoretic
deposition” or “electropainting,” is a process that
resembles electroplating, in that it uses an electric current to apply
thin-film primers and one-coat finishes onto the metallic substrates.
However, this organic finishing process does not deposit metal ions
onto the substrates, but rather, waterborne paint.
- is a quick, easy, economical chemical reduction application
process that avoids the use of electrolytic energy. Electroless nickel
plating is ideal for small parts, provides an even, uniform layer, leaves
no anode shadow, does not pose disposal problems and can be applied
to many metals, including all steels, irons, copper, brass, bronze,
lead free solders and nickel alloys.
is a process in which the paint is given a negative or positive charge
before it is sprayed and the workpiece is oppositely charged, resulting
in the attraction of the paint particles, uniform dispersion and reduction
of waste. Electrostatic spraying, which is well-suited to automation
because it increases production rate, reduces corrosion, protects against
scratching, stops contact with air, water, chemicals, etc., alters appearance
of workpieces and gives good finishes.
- Epoxy coating is the process of applying a thin layer of an epoxy, which includes a
variety of typically thermosetting polymer resins, over another
material such as plastic or metal.
is a method used to apply plastic materials to a substrate. Hot melt
coating is frequently used on papers and books and does not necessitate
the use of solvents.
are very dense and are highly wear- and corrosion-resistant.
a process by which a plastic transparent film is applied to one or both
sides of a product. Most frequently used for paper products, the laminate
enhances both decorative and protective qualities.
are applied by spraying—atomizing the paint into a fine mist—and
depositing the mist on the surface of the part, where the tiny droplets
flow together to form a film. Liquid paint coatings are available in
a wide variety of colors and contain binders, solvents and pigment.
is a coating process that is used in the pretreatment of iron and steel
surfaces prior to painting, especially military equipment that requires
oil or greased paints. Manganese phosphate coatings are highly corrosion
and wear resistant
is a process that removes excess iron molecules from the surface of
stainless steel products, typically with the use of nitric acid solutions.
The danger of rust then becomes negligible.
chemically convert the surface of a base metal into a non-metallic,
- Plastic coating is a layer of plastic material that is dried on top of a substrate.
Plastic coating is ideal for odd shapes and when materials need to be
- Steel coating refers to the substrate, which is the steel workpiece, being coated, rather than the coating material itself.
are typically zinc or aluminum and are heated until liquefied. Liquid
drops are then blown by means of a compressed air jet onto the substrate,
creating a porous coat.
which include physical vapor deposition (PVD) and chemical vapor deposition
(CVD), are used predominantly in the manufacturing of electrical devices.
is a process in which the coating material is applied in a vacuum chamber
to the substrate. Usually the material is vaporized and then transferred
through a chamber to the substrate.
is a paint pretreatment that is commonly used to develop good bonding
qualities between the paint and the galvanized or galvannealed coatings
on steel sheets and is applied while the steel is in a coil, to the
cut sheet or to the fabricated article. Zinc phosphate coatings greatly
aid paint adhesion, in that they dramatically decrease the tendency
for paint disbondment during subsequent atmospheric exposure in a corrosive
Coating Services Terms
The strength of the coating bond to the substrate. Some techniques for
measuring adhesion include the tape test, scratch adhesion test and stud-pull-off
used to apply an adhesive or bonding agent, including squeeze bottles,
pressure tanks, glue guns and coating machinery.
– A non-volatile material,
commonly a resin, in a coating that forms a film by binding the pigment
and additive particles together.
– A chemical agent,
sometimes added to waterborne coatings, which prevents microbial degradation
by killing the organisms that cause it.
– A compound
made from tar or asphalt that provides a protective finish for a surface.
– A machine
used to apply defect-free films to products. Factors that affect the quality
of the coating include line speed, viscosity and percent solids.
– The ability of a
substance to adhere to itself. When delamination occurs within a material,
it is referred to as cohesive failure.
– Also known as
“cohesive failure,” it is the separation of a coating from
its substrate. Delamination can also refer to the division among multiple
– A material that is quite
stable when exposed to harsh environments and is applied to such products
as semiconductors, chemical processing, wire, cable, piping and tubing.
Hylar is useful in the preparation of corrosion-resistant coatings for
chemical process equipment and durable decorative finishes on building
panels, due to its ability to be dissolved at high temperatures in certain
polar solvents, such as esters and ketones.
– A glass-fiber, reinforced
polyamide nylon material that provides superior insulation, strength and
durability, especially on windows.
– A material used in coating
applications to provide high mechanical and dielectric strength, thermal
stability and abrasion, chemical and solvent, UV and radiation and weathering
resistance. Kynar coatings have been used as pipe liners in chemical processing
plants, on equipment that is constantly exposed to high concentration
of chlorine and chlorine dioxide, typically in paper and pulp processing
plants, and in silicon microcircuit fabrication.
removes surface to produce a flat, even surface.
– An atypical polymer
conformal coating that conforms to almost any shape.
– The material that
is being coated.
– An adhesion
test for coatings that normally uses a diamond stylus to apply a force
to the coating. The test is affected by factors that include the substrate
material and its hardness, the geometry of the part and the thickness
and hardness of the coating.
An adhesion test in which a stud containing a head with a specified surface
area is epoxy-glued to the coating. A machine pulls on the stud with amplifying
force until it is pulled off.
– An adhesion
test in which a certified tape is adhered to a coating and removed. If
any coating is observed on the tape, it is a sign of an adhesive problem.
Coating Services Informational Video